6
Learn and remember the correct working methods. Beginners should always keep a low
speed, use extreme caution before routine and product knowledge is achieved. The user/cus-
tomer is responsible to handle the situation correctly. The product should not be taken into
use unless it can be done in a safe way for the user.
Warning!
Never use a equipment or product
with defect safety equipment.
• Check the tire pressure, recommended pressure 1 bar.
• Check the ball hitch for damage or wear.
OPERATING THE MACHINE
Only people who understand the safety information and instructions in this manual may op-
erate the equipment. Be alert and careful when working with the machine and only use the
equipment or product in the manner described in this manual.
When working with equipment that has moving parts, there is always the risk for injury. Be
careful when working with equipment equipped with hydraulic hoses ,oil under pressure can
penetrate the skin. Seek medical attention immediately if this occurs.
Always work alone with the equipment that are defined as single purpose equipment. Never
overload the trailer. Respect the equipment’s danger zone.
•
Check that the trailer is intact before connecting it to the vehicle.
•
Hook the trailer’s ball hitch on the ATV’s tow ball.
•
Ensure that the ball hitch is locked by lifting the drawbar, the hitch ball should be at-
tached to the tow ball.
•
Crank up the support wheel and raise the support wheel bar so it does not come into
contact with the ground while driving.
•
Be sure to tighten the support wheel bar firmly, so it does not vibrate loose and reaches
the ground while driving.
•
Do not load more than the maximum load of 500 kg.
•
ATV vehicle shall be braked when loading and unloading.
Warning!
For safety, this product should only be used in
the manner described in this manual. The user is
responsible for the instruction to be read through
and followed.
