6
SAFETY MEASURES BEFORE OPERATING
Please read the safety information and operating instructions carefully. Make sure that you
understand the safety information, operating instructions and warning decals. Use common
sense when using the implement and use the appropriate personal protective equipment Al-
ways check the performance of the machine combination that will be used. It is important
that these harmonize and match in a satisfactory manner. This is to ensure the implement or
product´s function and your and others’ safety.
Visually inspect the gear or the product before use. Fix or replace damaged and worn parts im-
mediately to reduce the risk of injury. Lubricate moving parts and check that all bolts and nuts
are tightened. Fix if necessary. Learn and remember properly working methods. Beginners
should keep a low speed until the person has learned how the machine or the product works.
The user / customer is responsible for the how the user handles the situation. If experiencing
the machine as dangerous for the user, the machine shall not be used.
•
Perform a safety check of the machine before each use. If you notice any errors or omis-
sions, the machine should immediately be repaired.
•
Make sure they are not any foreign objects in the machine before using it.
•
During operation, the machine must be on a hard, flat surface. Avoid working on slippery
surfaces, especially in winter.
•
Check the PTO-shaft drive shaft and the three point linkage before the coupling and use
of the chipper.
•
Check the work area before starting work. Make sure there are not any people or animals
nearby.
USE
Only people who understand the safety information and instructions in this manual may op-
erate the equipment. Be alert and careful when working with the machine and only use the
equipment or product in the manner described in this manual. When working with equipment
that has moving parts, there is always the risk of injury. Be careful when working with equip-
ment equipped with hydraulic hoses ,oil under pressure can penetrate the skin. Seek medi-
cal attention immediately if this occurs. Always work alone with the tools that are defined as
single porpose tools. Respect the equipment’s risk zone.
Warning!
Never use faulty safety equipments!
Warning!
NEVER allow anyone inexperienced to Drive
the tractor or / and machine!
