Kellfri 13-VT275, Operating Instructions Manual, Page: 9 / 28

9
Table of contents
OPERATION
There is a risk of crushing when working with equipment that has moving parts. Always make
sure that no one is near the conveyor when starting the belt. If you leave the conveyor, even if
it is only for a short time, always disconnect the power supply to the electric motor and discon-
nect the power plug from the socket.
1. Place the firewood conveyor on a stable level surface.
2. Connect the power cord to an earthed 230 V electrical socket.
3. Adjust the incline of the conveyor by lowering or raising the stabilisers.
4. Turn the power switch to the ON position.
5. When you have finished work, turn the power switch in the OFF position and unplug the
machine.
Avoid using the equipment at temperatures lower than -20°C and higher than +30°C.