Brightness
Off
A Low
B Medium
C High
Dry ‘Showroom’ mode
Warning!
Air overrun function
The system has an air overrun function which allows the air to continue to operate for approximately 1 second after the
water flow stops. This function purges the water from the shower head, reducing the build up of lime-scale.
•
To activate Showroom mode short press the button (1-2 seconds) with NO WATER
•
Wet Working mode is automatically activated when water is turned on the Bubble Spa shower
•
Short pressing the button will turn the light on/off regardless of what mode is currently selected. Once switched back
on the light will go to the most recently used mode
•
If the water is turned on while the Showroom mode is still engaged the lights will change to Bubble Mode 1, 4 or 7 –
matching the level brightness.
•
The Bubble Spa shower will ‘remember’ the last light mode used during the previous shower session. Once a new
shower session begins the last used Bubble mode will be applied. If Showroom mode is activated between shower
sessions, then the previously used wet working mode will not be ‘remembered’.
Diagnostic Function
Long press the button (5 seconds) to engage the diagnostic tool. During this function the main light array will flash x times
to confirm this mode has been initiated - to exit press and hold.........
Strobing Warning!
!
This product uses a strobing effect at 72Hz (Bubble mode 1, 4 and 7). Although
this is above the ‘triggering zone’ this may cause discomfort to come people.
Should anyone experience discomfort, users are advised to change bubble
modes or switch off the LED.
49
