To activate the lock, press and hold down the
(^)
and
(v)
buttons and then
press and release the
button. Continue to hold the
(^)
and
(v)
buttons down
until the screen displays
LOCK
(takes about 2 seconds) release the
(^)
and
(v)
buttons. The IPG20 is now locked. When locked, pressing the
(P)
button will not allow access to the IPG20’s menu, instead a message
PROGRAM LOCKED PRESS RESET
is displayed on the screen.
The IPG20 is supplied by the factory in an unlocked state and can be
programmed using its buttons. To prevent unauthorised personnel from
altering its settings, the programming button
(P)
can be locked.
You can restore the IPG20 to its default factory settings at any time by
pressing and holding down the
(P)
button and pressing and then releasing
the
(R)
button. Once the
(R)
button has been released, release the
(P)
button. The screen then displays
SETTINGS CLEARED PRESS P
Doing this
removes any settings you may have entered and restores the controller to its
default state.
To unlock the IPG20 repeat the above procedure, press and hold down the
(^)
and
(v)
buttons and then press and release the
(R)
button. Continue to
hold the
(^)
and
(v)
buttons down until the screen displays
UNLOCKED
(takes about 2 seconds) release the
(^)
and
(v)
buttons.
For a description of the functions of the buttons and lights,
please read pages 2 and 3 of this manual before proceeding.
1) Use the least number of functions possible. Do not program in functions
you do not specifically require, as to do so will make the system’s
operation unnecessarily complicated and may introduce unpredictable
interactions between the various functions.
GETTING STARTED
LOCKING & UNLOCKING THE IPG20
LOCKING THE IPG20
RESTORING FACTORY DEFAULTS (Purging the Settings)
PROGRAMMING THE IPG20
24
UNLOCKING THE IPG20
