High Heating and Low heating setting:
If press "HEATER" button on keypad by 3 seconds,can switch
between
℃
and
℉
(Please Note:this function is not available on the
remote control.) Boot default setting temperature is 22
℃
(72
℉
), if the
room temperature is lower than the setting temperature, Then the
electric fireplace high heating mode start to work, if you need electric
fireplace heating work in low heating mode, then click the keypad or
remote control the HEAT button to switch the heating on high and low
working mode ( first time press the button the display window will
display the current heating work mode, such as the current heating
setting mode is high heating then window display , when you press
the button once again , the window display the heating mode
become low heating , if you press the button once again, then the
window No heating mode display , the heating mode become OFF
mode, if you repeat press the HEAT button, then the heating mode will
be work on H-L-O three kind mode in cycles), every time you press the
button will have a short buzzer sound, if you want to turn off the electric
fireplace heating function, you also can operate on the keypad or
remote control setting temperature "DOWN" button Make the setting
temperature is lower than the room temperature , then you can shut off
the electric fireplace heating function. When the heating is turned off,
the fan which inside the electric fireplace will continue to work for 10
seconds before stopping.
Timer Setting:
Timer can be set it between of 0-12 hours, When turn on , the
electric fireplace timing of the default is 0 hours, you can operate
the timer setting by the keypad or remote control With the TIME
button, After the electric fireplace on working, press the TIME
buttons on the keypad or on the remote control, then The
display at the temperature display in the display window changes
to "00" and is flashing, at this time, every time you press the
button of the TIME in
(00-30-1H-2H-3H-4H-5H-6H-7H-8H-9H-10H-11H-12H)change,
How long time you need it, then you stop press,
after display flashing by 10 seconds, if you not operate, the
display will be transferred back to the room temperature display
and in a constantly light state.
Summary of Contents for Oregon KT0940
Page 31: ...PARTS HARDWARE SPECIFICATION AND DIMENSION PRODUCT DIMENSIONS ...
Page 45: ......
