Series 2600B System SourceMeter® Instrument Reference Manual
Appendix G: Model 2400 emulation
2600BS-901-01 Rev. B / May 2013
G-15
Model 2400 SCPI command compatibility
The following tables lists all the Model 2400 SCPI commands that are not fully supported by the
Model 2400 personality script (
Persona2400
) and each command's specific compatibility details.
:CALCulate subsystem
:CALCulate2:NULL:ACQuire
Each time the personality script is run, the null offset value will be reset to zero (0). Until a measurement is taken, this
command will use a zero (0) for the null offset value. After a measurement is taken, this command will use latest
measurement to set the null offset value (the same way as a Model 2400).
:DISPlay subsystem
:DISPlay:DIGits 4|5|6|7|DEFault|MINimum|MAXimum
When 3.5 digits or MINimum is requested, the instrument will set the resolution to 4.5 digits.
:DISPlay:DIGits? [DEFault|MINimum|MAXimum]
When queried for the MINimum, the instrument returns 5.
:DISPlay:ENABle <Bool>
The Series 2600B performance is not degraded by display operation. The instrument will accept the command but no
action is performed.
:DISPlay:WINDow2:ATTRibutes?
The instrument always returns 32 zeros.
:DISPlay:WINDow2:TEXT:STATe <Bool>
Changing this setting also changes the
:DISPlay[:WINDow[1]]:TEXT:STATe
setting to the same value.
DISPlay[:WINDow[1]]:ATTRibutes?
The instrument always returns 20 zeros.
DISPlay[:WINDow[1]]:TEXT:STATe <Bool>
Changing this setting also changes the
:DISPlay:WINDow2:TEXT:STATe
setting to the same value.
:ROUte subsystem
:ROUTe:TERMinals FRONt|REAR
The instrument will accept the command and ignore it.
:ROUTe:TERMinals?
The instrument will always return REAR.
Summary of Contents for System SourceMeter 2601B
Page 841: ......
