![background image](http://html2.mh-extra.com/html/keithley/system-sourcemeter-2601b/system-sourcemeter-2601b_reference-manual_4009934811.webp)
Appendix E: Status model
Series 2600B System SourceMeter® Instrument Reference Manual
E-4
2600BS-901-01 Rev. B / May 2013
Status function summary
The following functions and attributes control and read the various registers. Additional information for
the various register sets is included later in this section. Also, refer to the specific command as listed
in
TSP commands
(on page 7-7).
Status function summary
Type
Function or attribute
Status summary
status.condition
status.node_enable
status.node_event
status.request_enable
status.request_event
status.reset
Measurement event
status.measurement.*
status.measurement.buffer_available.*
status.measurement.current_limit.*
status.measurement.instrument.*
status.measurement.instrument.smu
X
.*
status.measurement.reading_overflow.*
status.measurement.voltage_limit.*
Operation status
status.operation.*
status.operation.calibrating.*
status.operation.instrument.*
status.operation.instrument.digio.*
status.operation.instrument.digio.trigger_overrun.*
status.operation.instrument.lan.*
status.operation.instrument.lan.trigger_overrun.*
status.operation.instrument.smu
X
.*
status.operation.instrument.smu
X
.trigger_overrun.*
status.operation.instrument.trigger_blender.*
status.operation.instrument.trigger_blender.trigger_overrun.*
status.operation.instrument.trigger_timer.*
status.operation.instrument.trigger_timer.trigger_overrun.*
status.operation.instrument.tsplink.*
status.operation.instrument.tsplink.trigger_overrun.*
status.operation.measuring.*
status.operation.remote.*
status.operation.sweeping.*
status.operation.trigger_overrun.*
status.operation.user.*
Questionable status
status.questionable.*
status.questionable.calibration.*
status.questionable.instrument.*
status.questionable.instrument.smu
X
.*
status.questionable.over_temperature.*
status.questionable.unstable_output.*
Standard event
status.standard.*
System summary
status.system.*
status.system2.*
status.system3.*
status.system4.*
status.system5.*
* =
.condition
,
.event
,
.ntr
,
.ptr
and
.enable
smu
X
: For Models 2601B, 2611B, and 2635B, this value is
smua
(SMU Channel A); for Models 2602B, 2604B, 2612B,
2614B, 2634B, and 2636B, this value can be
smua
(for SMU Channel A) or
smub
(for SMU Channel B).
Summary of Contents for System SourceMeter 2601B
Page 841: ......