![background image](http://html2.mh-extra.com/html/keithley/system-sourcemeter-2601b/system-sourcemeter-2601b_reference-manual_4009934458.webp)
Section 7: TSP command reference
Series 2600B System SourceMeter® Instrument Reference Manual
7-118
2600BS-901-01 Rev. B / May 2013
Example
print(lan.config.method)
Outputs the current method.
For example:
1.00
Also see
lan.restoredefaults()
(on page 7-121)
lan.config.speed
This attribute contains the LAN speed used when restarting in manual configuration mode.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
100 (100 Mbps)
Usage
speed
= lan.config.speed
lan.config.speed =
speed
speed
LAN speed setting in Mbps (10 or 100)
Details
This attribute stores the speed that will be used if the LAN is restarted for manual configuration operation.
This attribute does not indicate the actual setting presently in effect. Use the
lan.status.speed
attribute to
determine the present operating state of the LAN.
The LAN speed is measured in megabits per second (Mbps).
Example
lan.config.speed = 100
Configure LAN speed for 100.
Also see
lan.restoredefaults()
(on page 7-121)
lan.status.speed
(on page 7-127)
lan.config.subnetmask
This attribute contains the LAN subnet mask.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
LAN restore defaults
Nonvolatile memory
"255.255.255.0"
Usage
mask
= lan.config.subnetmask
lan.config.subnetmask =
mask
mask
String that specifies the LAN subnet mask value in dotted decimal notation
Summary of Contents for System SourceMeter 2601B
Page 841: ......