![background image](http://html2.mh-extra.com/html/keithley/series-2200/series-2200_specification-and-performance-verification-technical-reference_3968597035.webp)
Performance Veri
fi
cation
Table 27: Test equipment (cont.)
Item
Minimum requirements
Example
9.
50 m
Ω
resistor for Remote
Sense testing
(2 required)
One of these 50 m
Ω
resistors
may be substituted with
item 7.
0.050
Ω
, 5 W.
To perform the tests as illustrated, both leads of each
resistor require a Banana Jack connector (e.g. Pomona
model 4834).
OHMITE 15FR050E
10.
Load resistor for Voltage
Noise testing
Loading resistors for high current in voltage mode, and
high voltage in current mode
All resistors should be rated for at least 50 W. Ohms
tolerance within 5%. Resistor composition is not critical.
To perform the tests as illustrated, both leads of the load
resistor require a Banana plug/jack (or equivalent) to
connect to the power supply.
Channel 1
12
Ω
Vishay/Dale RH05012R00FE02
Channel 2
12
Ω
Vishay/Dale RH05012R00FE02
Channel 3 (2230-30-1 and
2230J-30-1 only)
2.5
Ω
Vishay/Dale RH0502R500FE02
11.
Load Resistor for Current
Noise testing
1
Ω
, 100 W, 5%
To perform the tests as illustrated, both leads of the load
resistor require a Banana plug/jack (or equivalent) to
connect to the power supply.
Vishay/Dale HL10006Z1R000JJ
12.
Oscilloscope
20 MHz bandwidth limited oscilloscope at 1 mV/division
Tektronix DPO3012
13.
Oscilloscope probe
Low capacitance 1 M
Ω
/10 M
Ω
1X/10X 6 MHz/200 MHz
probe
Tektronix P2220, 1X probe
14.
Oscilloscope probe
Low capacitance 10 M
Ω
500 MHz probe
Tektronix P6139A, 10X probe
15.
Coaxial cable
50
Ω
BNC, male-to-male
Tektronix part number:
012-0482-00
16.
BNC adapter
BNC female to banana breakout
Pomona Electronics 3073
Series 2200 Multichannel Programmable DC Power Supplies Technical Reference
25