Section 3: Equipment startup
S540 Power Semiconductor Test System Administrative Guide
3-12
S540-924-01 Rev. D / January 2019
Network information
The network connections for the system computer include:
System controller network interface: Ethernet port (10, 100, or 1000 Base-T capable using RJ-45)
Supplied cables: One ethernet crossover cable (connects the computer to the tester)
One 10Base-T patch cable (connects to your network)
IP address is specified by you
When setting up the computer for the S540 system, do not change the computer name. Software
licenses are tied to the computer name. If you change the computer name, the Keithley Interactive
Test Tool (KITT), Keithley Test Execution Engine (KTXE), and other Keithley Test Environment
(KTE) tools will not work.
