KUSB-488B-903-01 Rev. A / March 2010
5
Model KUSB-488B USB to GPIB Converter Quick Start Guide
Step 2: Hardware installation
CAUTION
You must install the KUSB-488B software before installing the hardware (refer to
Driver installation
above). Failure to install the software first may result in damage to
equipment.
Hardware installation procedure
To install the Model KUSB-488B USB to GPIB Converter:
1.
Connect the Model KUSB-488B to the GPIB connector on the rear panel of the instrument.
2.
Plug the Model KUSB-488B USB cable into a USB port on your computer. The Found New
Hardware dialog box will display on your computer screen.
3.
Select
No, not at this time
, and then click
Next
(see
Figure 4
).
Figure 4: Found New Hardware Wizard dialog box
4.
Select
Install the software automatically
to initiate installation of the KUSB-488B Loader
software, and then click
Next
(see
Figure 5
).
Summary of Contents for KUSB-488B
Page 2: ... ...