As delivered from Keithley Instruments, the DMM6500 is
set to work with the SCPI command set.
How do I change the command set?
You can change the command set that you use with the
DMM6500. The command sets that are available include:
•
SCPI: An instrument-specific language built on the
SCPI standard.
•
TSP: A scripting programming language that contains
instrument-specific control commands that can be
executed from a stand-alone instrument. You can use
TSP to send individual commands or use it to combine
commands into scripts.
•
SCPI2000: An instrument-specific language that allows
you to run code developed for Keithley Instruments
Model 2000 instruments.
•
SCPI34401: An instrument-specific language that
allows you to run code developed for Keysight Model
34401 instruments.
You cannot combine the command sets.
To set the command set from the front panel:
1.
Press the
MENU
key.
2.
Under System, select
Settings
.
3.
Select
command set
.
4.
Reboot the instrument at the prompt.
