4-8
Cabling and Wiring
Note:
Each EXP-16, EXP-16/A, or EXP-GP expansion board is
associated with an analog input channel on the DAS-800 Series board.
You specify the associated on-board channel by setting a jumper on the
expansion board. Make sure that you use a unique jumper setting for each
expansion board you are using. Refer to your expansion board
documentation for more information.
You can use the J2 connector on the last expansion board in the chain to
attach an STA-08 / STA-08PGA screw terminal accessory. This allows
you to access the remaining functions of the DAS-800 Series board.
Figure 4-7 illustrates how to connect two EXP-16 expansion boards, one
EXP-GP expansion board, and an STA-08 screw terminal accessory to a
DAS-800 board.
Figure 4-7. Connecting Multiple Expansion Boards
Note:
You can also attach up to four MB-02 backplanes to a DAS-800
Series board using an STA-SCM8 screw terminal accessory and up to
four C-2600 cables. Refer to the
MB Series User’s Guide
for
more information.
DAS-800
Board
EXP-16
EXP-16
EXP-GP
STA-08
J1
J2
J1
J2
J1
J2
J1
J2
