Models 707B and 708B Switching Matrix Reference Manual
Section 7: Command reference
707B-901-01 Rev. A / August 2010
7-81
Key codes
Value Key
list
Value Key
list
0 display.KEY_NONE
83
display.KEY_RUN
66 display.KEY_DELETE
84
display.KEY_TRIG
67 display.KEY_EXIT
86
display.KEY_STEP
69 display.KEY_CLOSE
87
display.KEY_CHAN
70 display.KEY_SLOT
90
display.KEY_INSERT
72 display.KEY_DISPLAY
91
display.KEY_MENU
74 display.KEY_ENTER
93
display.KEY_OPEN
76 display.KEY_LOAD
94
display.KEY_PATT
77 display.KEY_SCAN
97
display.WHEEL_ENTER
79 display.KEY_OPENALL
107
display.WHEEL_LEFT
80 display.KEY_CONFIG
114
display.WHEEL_RIGHT
NOTE
When using this function, send built-in constants such as
display.KEY_STEP
(rather than the
numeric value of
86
). This will allow for better forward compatibility with firmware revisions.
Example
display.sendkey(display.KEY_RUN)
Simulates pressing the RUN key.
Also see
(on page 2-18)
display.setcursor()
This function sets the position of the cursor.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function Yes
Usage
display.setcursor(row, column)
display.setcursor(row, column, style)
row
The row number for the cursor (1 or 2).
column
The active column position to set; row 1 has columns 1 to 20, row 2 has columns 1
to 32.
style
Set the cursor to invisible (0, default) or blinking (1).
