protected even if one insulation layer fails. Refer to IEC
61010-1 for specific requirements.
Make sure all connections are behind a locked cabinet door
or other barrier. This protects the system operator from
accidentally removing a connection by hand and exposing
hazardous voltages.
Use high-reliability fail-safe interlock switches to
disconnect power sources when a test fixture cover is
opened.
Where possible, use automatic handlers so operators are
not required to access the DUT or other potentially
hazardous areas.
Provide training to all users of the system so they
understand all potential hazards and know how to protect
themselves from injury.
In many systems, during power up, the outputs may be in
an unknown state until they are properly initialized. Make
sure the design can tolerate this situation without causing
operator injury or hardware damage.
Additionally, always read and follow all safety warnings provided with
the specific instruments to keep system users safe.
Summary of Contents for 707B
Page 1: ...Models 707B and 708B Quick Start Guide...
Page 18: ......
