Keithley 7013-C, Instruction Manual

Page: 8 / 71

7013-C and 7013-S 20-Channel Relay Switch Cards Specifications
IN
HI
LO
Each Channel
LO
HI
OUT
RELAY SWITCH CONFIGURATION: 20 independent channels of 2-pole switching.
CONTACT CONFIGURATION: 2-pole Form A (Hi, Lo).
CONNECTOR TYPE:
7013-C: 96-pin male DIN connector.
7013-S: Screw terminal, #16AWG maximum wire size, with .092 inch O.D. 28 conductors
per card maximum. #22AWG typical wire size with .062 inch O.D. 88 conductors per
card maximum.
MAXIMUM SIGNAL LEVEL:
DC Signals: 110V DC between any two pins, 1A switched. 30VA (resistive load).
AC Signals: 125V rms and 175V AC peak, between any two pins, 1A switched, 60VA (resis-
tive load).
COMMON MODE VOLTAGE: 175V peak, any pin to chassis.
CONTACT LIFE: Cold Switching: 10
8
closures.
At Maximum Signal Levels: 10
5
closures.
CHANNEL RESISTANCE (per conductor): < 1
Ω
.
CONTACT POTENTIAL:
7013-C: <1µV per channel contact pair
<3µV typical per single contact.
7013-S: <500nV per channel contact pair
<1.5µV typical per single contact.
OFFSET CURRENT: < 100pA.
ACTUATION TIME: 3ms.
ISOLATION: Channel to Channel: >10
10
Ω
, <25pF.
Differential: >10
10
Ω
, <50pF.
Common Mode: >10
10
Ω
, <100pF.
CROSSTALK (1MHz, 50
Ω
Load): <–50dB.
INSERTION LOSS (50
Ω
Source, 50 Load): <0.1dB below 1MHz, <3dB below 10MHz.
RELAY DRIVE CURRENT (per relay): 16mA.
ENVIRONMENT: Operating: 0° to 50°C, up to 35°C <80% RH.
Storage: –25°C to 65°C.