Model 4299-1 Single-Unit Rack-Mount Kit Installation Instructions
4
PA-908 Rev. F April 2021
To install the mounting hardware on the instrument:
1. Select the side that will be closest to the rack rail (see note above).
2. Secure the rear rack-mount bracket (2602-334) to the side of the instrument using two Phillips pan-head
SEMS screws (#10-32 × 3/8 PPHSEM).
Figure 4: Rear rack-mount bracket
3. Secure the front rack-ear (2602-355) to the rear holes in the rack ear if you are installing one Series 2600A
or 2600B System SourceMeter
®
instrument (refer to the following figure) and to the same side of the
instrument as the rear rack-mount bracket using two Phillips pan-head screws (#8-32 × 3/8 PPH).
If you are not installing a Series 2600A or 2600B instrument, use the front holes to attach the rack
ear and half-rack front panel. See the note in the following figure.
