To connect the interlock cable:
1. Connect one end of the supplied interlock cable (part
number 236-ILC-3) to the rear panel of the 4200A-SCS.
The location of the rear panel interlock connector is shown
in the following graphic.
2. Connect the other end of the connector to the test
fi
xture.
Test connections
If you are testing discrete devices, you need a test
fi
xture that is
equipped with 3-lug triaxial connectors. The 8101-PIV test
fi
xture
that is included with the 4200A-SCS-PK3 allows the 4200A-SCS
to be connected to a discrete device.
For connections to a probe station for wafer testing, see the
4200A-SCS Learning Center
.
Connect a test fi xture & DUT to the 4200A-SCS
To connect the test
fi
xture and DUTs for the I-V test, see the I-V
Test section graphic “Make connections for the I-V test.”
The outer shield of the triaxial cables connects the 8101-PIV
to the 4200A chassis, which connects to common.
Safety
Introduction
Connect
I-V Test
C-V Test
FAQs
Next Steps