Run the vds-id test
Clarius can run a single test or a sequence of tests.
To run a single test, check the test and select it in the project
tree. The test should be highlighted. When you select
, only
that test will run. For example, in the following graphic, when you
select
, only the
vds-id
test will run.
In the following example, only one test is run.
To run the vds-id test:
1. In the project tree, select the
vds-id
test to highlight it.
2. On the toolbar, select .
While the test is running, Run shows two arrows circling the icon
and Stop turns red:
When the test is complete, Run and Stop return to normal: