Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
PA-952 Rev. A / November 2007
1
Model 4200-CVU
Capacitance Voltage Unit (CVU) Quick Start Guide
Model 4200-CVU Quick Start Guide overview
You can quickly begin using your Keithley Instruments Model 4200 Capacitance Voltage Unit (Model 4200-CVU) by
performing the steps in this Quick Start Guide (QSG). For detailed information about the Model 4200-CVU, refer to
the Complete Reference CD-ROM that came with your Model 4200-SCS Semiconductor Characterization System.
The steps outlined below and detailed in the following pages will allow you to quickly begin using your
Model 4200-CVU:
•
Step 1:
Unpack your Model 4200-SCS.
•
Step 2:
Make basic system connections (power cord, keyboard, and optional printer)
•
Step 3:
Connect a test fixture to the Model 4200-SCS (Model 4200-CVU card preinstalled)
•
Step 4:
Power-up and log on
•
Step 5:
Start the KITE software and select the “cv-cap” test in the default project
•
Step 6:
Define your test
•
Step 7:
Run the “cv-cap” test
•
Step 8:
View the data sheet
•
Step 9:
View the graph
•
Step 10:
Print and export data
The example in this QSG uses the default project and runs the “cv-cap” test. If you wish to select a different project
and/or test, you must modify the procedures accordingly. Figure 1 shows how the Keithley Interactive Test
Environment (KITE) window will look after the default project and “cv cap” test are selected.
