Series 3700A System Switch/Multimeter User's Manual
Section 3: Using the web interface
Figure 22: Series 3700A Channel pattern configuration dialog box
Exercise: Close channels in "Test1Pattern" from the web interface
To close channels in channel pattern "Test1Pattern" from the web interface:
1. Click
Pattern
(above the Channel Action Type box). The Channel Pattern Configuration dialog
box is displayed.
2. Select
Test1Pattern
from the list at the top of the dialog box.
3. In the Actions area, select the type of close you want to perform.
Figure 23: Close channels in a pattern
4. Click
Close
to close the channels.
5. When you are done acting on this channel pattern, click
Close
at the bottom of the dialog box to
exit.
3700AS-900-01 Rev. A / July 2011
3-7