Keithley 2701, Instruction Manual

Page: 52 / 61

4-16 Software and Drivers Model 2701 Instrument Networking Instruction Manual
Procedure to set QueryInstrStatus attribute to False
1. If not already running, access the configuration utility ( See “Procedure to start Keithley
configuration wizard” on page 4-11. ).
2. Close the wizard and use the configuration panel as shown Figure 4-11 .
3. Select the instrument whose configuration setting you wish to modify.
4. Then double click on the QueryInstrStatus attribute in the right-hand pane of the utility.
A pop-up edit box will appear (
Figure 4-12 ).
5. In the edit box, change the attribute setting to False and press OK.
6. Figure 4-13 will appear. Close the configuration panel (save changes when prompted).
Figure 4-11
Advanced configuration window—select instrument