Model 2651A High Power System SourceMeter® Instrument Reference Manual
Appendix C: LAN concepts and settings
2651A-901-01 Rev. A / March 2011
C-13
Viewing the network settings
To view the active network settings:
1. From the front panel, press the
MENU
key, and then select
LAN > STATUS
.
2. Use the navigation wheel to select one of the following network settings:
•
IP-ADDRESS
•
GATEWAY
•
SUBNET-MASK
•
METHOD
•
DNS
•
MAC-ADDRESS
3. Press
the
ENTER
key to view the active setting.
4. Press
the
EXIT (LOCAL)
key once to return to the STATUS menu.
Confirming the active speed and duplex negotiation
The Model 2651A automatically detects the speed and duplex negotiation active on the LAN. Once
the speed and duplex negotiation is detected, the instrument automatically adjusts its own settings to
match the LAN settings.
To confirm the active LAN speed and duplex mode:
1. From the front panel, press the
MENU
key.
2. Select
LAN > STATUS
.
3. Use the navigation wheel
to select one of the following:
•
SPEED
•
DUPLEX
4. Press
the
ENTER
key to view the active setting.
5. Press
the
EXIT (LOCAL)
key once to return to the STATUS menu
