Model 2651A High Power System SourceMeter® Instrument Reference Manual
Section 5: Remote commands
2651A-901-01 Rev. A / March 2011
5-21
Running a factory script
Use either of the following commands to run a factory script:
script.factory.scripts.
name
()
script.factory.scripts.
name
.run()
Where:
name
is the name of the factory script.
Example:
Run the factory script named “KIPulse”
script.factory.scripts.KIPulse()
Running a factory script function from the Model 2651A front panel controls
1. Press
the
LOAD
key.
2. Select
FACTORY
.
3. Select the function to run and press
RUN
key.
Retrieving and modifying a factory script listing
The script listing for a factory script can be retrieved and modified. However, it cannot be saved as a
factory script. The modified script can be saved as a user script using the same name or a new name.
An imported factory script can only be loaded back into the Model 2651A as a user script.
The following function retrieves a script listing. The script code is output with the shell keywords
(
loadscript
or
loadandrunscript
, and
endscript
):
script.factory.scripts.
name
.list()
Where:
name
is the name of the factory script.
Example:
Retrieve the script listing for a factory script named “KIPulse”:
script.factory.scripts.KIPulse.list()