2606B System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2606B-901-01 Rev. B / May 2018
7-53
digio.trigger[N].EVENT_ID
This constant identifies the trigger event generated by the digital I/O line N.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Constant
Yes
Usage
eventID
= digio.trigger[
N
].EVENT_ID
eventID
The trigger event number
N
Digital I/O trigger line (1 to 14)
Details
To have another trigger object respond to trigger events generated by the trigger line, set the other
object's stimulus attribute to the value of this constant.
Example 1
digio.trigger[5].stimulus = digio.trigger[3].EVENT_ID
Uses a trigger event on digital I/O
trigger line 3 to be the stimulus for
digital I/O trigger line 5.
Also see
None
digio.trigger[N].mode
This attribute sets the mode in which the trigger event detector and the output trigger generator operate on the
given trigger line.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
Instrument reset
Digital I/O trigger
N
reset
Recall setup
Not saved
0
(digio.TRIG_BYPASS)
Usage
triggerMode
= digio.trigger[
N
].mode
digio.trigger[
N
].mode =
triggerMode
triggerMode
The trigger mode; see
Details
for values
N
Digital I/O trigger line (1 to 14)
Details
Set
triggerMode
to one of the following values: