![background image](http://html1.mh-extra.com/html/keithley/2600a-series/2600a-series_reference-manual_4006539304.webp)
16-12
Return to
2600AS-901-01 Rev. B / September 2008
Section 16: LAN Concepts and Settings
Series 2600A System SourceMeter® Instruments Reference Manual
Figure 16-4
LAN CONFIG/FAULT
Viewing the network settings
You can use the Status menu to view the active network settings.
Complete the following steps to view the active network settings.
1.
From the front panel press,
MENU
>
LAN
>
STATUS
.
2.
Turn the navigation wheel to the right or to the left to view one of the following network
settings:
•
IP address
•
Gateway
•
Subnet-mask
•
Method
•
DNS
•
MAC address
3.
Push
the
navigation wheel
to view the status.
4.
Press
ENTER
to return to the STATUS menu.
Confirming the active speed and duplex negotiation
The Series 2600A automatically detects the speed and duplex negotiation active on the LAN.
Once the speed and duplex negotiation is detected, the instrument automatically adjusts to match
the LAN settings.
Confirming port numbers
Use the port menu to view the ports numbers assigned to each protocol.
command interface and the required port number.
Table 16-2
Port number
Command Interface
Port number
Raw socket
5025
Telnet
23
VXI-11
1024
DST
1030