Keithley 2461, Reference Manual, Page: 919 / 1109

Section 8: TSP command reference Model 2461 Interactive SourceMeter® Instrument Reference Manual
8-246 2461-901-01 A/November 2015
Details
Setting the pulse width to zero (0) seconds asserts the trigger indefinitely. To release the trigger line,
use
trigger.digout[ N ].release()
.
Example
digio.line[4].mode = digio.MODE_TRIGGER_OUT
trigger.digout[4].pulsewidth = 20e-6
Sets the pulse width for trigger line 4 to
20 µ s.
Also see
digio.line[N].mode (on page 8-50)
digio.line[N].reset() (on page 8-52)
Digital I/O port configuration (on page 3-87)
trigger.digout[N].assert() (on page 8-244)
trigger.digout[N].release() (on page 8-246)
trigger.digout[N].release()
This function releases an indefinite length or latched trigger.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
trigger.digout[ N ].release()
N
Digital I/O trigger line (1 to 6)
Details
Releases a trigger that was asserted with an indefinite pulsewidth time. It also releases a trigger that
was latched in response to receiving a synchronous mode trigger. Only the specified trigger line is
affected.
Example
digio.line[4].mode = digio.MODE_TRIGGER_OUT
trigger.digout[4].release()
Releases digital I/O trigger line 4.
Also see
digio.line[N].mode (on page 8-50)
Digital I/O port configuration (on page 3-87)
trigger.digout[N].assert() (on page 8-244)
trigger.digout[N].pulsewidth (on page 8-245)