![background image](http://html2.mh-extra.com/html/keithley/2302/2302_instruction-manual_3932733062.webp)
2-22
Basic Power Supply Operation
DVM measurements
The following command sequence demonstrates how to measure voltage applied to the DVM
input of the power supply:
Battery channel (#1)
DISP:CHAN 1
‘ Set active channel - battery.
SENS:FUNC ‘DVM’
‘ Select the DVM Input function.
SENS:NPLC 6
‘ Set integration rate to 6 PLC.
SENS:AVER 10
‘ Set average reading count to 10.
READ:ARR?
‘ Trigger and return 10 readings. The average
of the 10 readings is displayed on the front
panel.
Charger channel (#2)
DISP:CHAN 2
‘ Set active channel - charger.
SENS2:FUNC ‘DVM’
‘ Select the DVM Input function.
SENS2:NPLC 3
‘ Set integration rate to 3 PLC.
SENS2:AVER 8
‘ Set average reading count to 8.
READ2:ARR?
‘ Trigger and return 8 readings. The average
of the 8 readings is displayed on the front
panel.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Summary of Contents for 2302
