Getting Started 1-11
3.
With the desired mode and active channel displayed, press ENTER. Now the display will
reflect this desired mode and active channel. Note that after selecting PULSE
CURRENT, use the
▲
or
▼
key to select the desired pulse measurement: pulse high,
pulse low, or pulse average. Examples of the display modes are shown as follows:
Table 1-1
Display samples
Display mode
Samples for Channel #1
(Battery)
Samples for Channel #2
(Charger)
Reference
Actual V and I:
6.116 V
#1 ON
6.116 V
#2 ON
Section 2
1.2058 A
1.2058 A
DVM input:
DVM INPUT
#1 OFF
DVM INPUT
#2 OFF
Section 2
4.993 V
4.993 V
Pulse current:
PULSE HI
#1 ON
PULSE HI
#2 ON
Section 3
2.1947 A
2.1947 A
PULSE LO
#1 ON
PULSE LO
#2 ON
0.2147 A
0.2147 A
PULSE AVG
#1 ON
PULSE AVG
#2 ON
1.1495 A
1.1495 A
Long integration:
LONG INT
#1 ON
LONG INT
#2 ON
Section 4
1.0236 A
1.0236 A
NOTES
“
#1
” or “
#2
” indicates present active channel. “
ON
” indicates that the output is turned
on. With the output turned off, “
OFF
” is displayed. See Section 2 for details on output-
ting current and voltage.
“
NO PULSE
” is displayed if the output is OFF or pulses are not detected (output ON)
for pulse current and long integration display modes only.
When a change is made that affects the readings being taken, dashes are displayed
instead of readings. The dashes remain until a valid reading for the new condition is
taken.
Default settings
The power supply can be set to power-on with the factory default conditions (RST defaults)
or to user-saved setup conditions. The factory default conditions are listed in
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
Summary of Contents for 2302
