Section 2: Card connections and installation
Model 2000-SCAN Scanner Card User's Manual
2-4
2000-SCAN-900-01 Rev. A / April 2018
Card connectors
The following figure shows the input and output connectors for the card. Card connectors include:
•
CH 1 to 10 (channels 1 to 10): HI and LO input terminals provided for each of the 10 channels on
the card.
•
OUT A: HI and LO output connections for all 10 channels in 2-pole mode or channels 1 to 5 in
4-pole mode.
•
OUT B: HI and LO output connections for channels 6 to 10 in 4-pole mode.
To access the connectors, open the plastic shield by pressing in the locking tab, and swing the shield
away from the circuit board.
Figure 2: Card connectors