Service Department (800) 888-7009
1
KEISER Rear Wheel Drive Bike
ASSEMBLY INSTRUCTIONS
Tools needed for assembly:
Torque wrench (0-90 ft-lbs.)
5/8 inch open-end wrench
#2 Phillips screwdriver
Paste or Spray wax (not provided)
Clean cloth
A.
Unpack
1. Remove the following contents from the packing box:
a)
Handle bar Assembly
b)
Base frame
c)
Main frame
d)
Pedals
The following are packaged in a plastic bag:
e)
Set of 4 Bolts, 4 Acorn Nuts and 8 Washers
f)
Handle Stud Assembly
g)
Loctite 242
h)
1 paper clip
i)
2 plastic dowels (one shorter than the other)
2. Carefully remove the bike from the cardboard box, and check to make sure all
of the parts are present and are not damaged.
B.
Waxing
Tools Required: Paste or spray on wax and a Clean cloth
1.
Prior to assembling the main frame and base frame assembly, a coat of paste
wax
must
be applied. This will help protect the powder coating paint on the
frame.
2.
Apply the wax in accordance to the wax manufacture’s instructions. We
recommend a paste or spray on carnuba wax, such as Turtle Wax
®
.
