6
7
Care and maintenance
Before you carry out any operations on the machine, and especially when changing the
mixing tool, always pull out the power plug first.
Clean the machine and the mixing tool immediately after use.
Take the mixing tool out of the coupling after you have finished your work.
Grease the M14/M27 mount of the coupling at regular intervals with suitable grease.
Keep the ventilation slits clean and clear at all times so that the machine can be properly
cooled. Blocked ventilation slits will lead to irreparable damage to the machine.
Make sure that the ON/OFF switch moves and releases smoothly at all times.
The machine is equipped with self-deactivating carbon brushes. This means that the
machine will shut itself down once a certain level of wear is reached. The carbon brushes can
be replaced by the authorized customer service centre or by the KEISERtools Service centre.
Have repairs carried out only by an approved workshop or by your KEISERtools Service. Only
use original KEISERtools accessories and replacement parts.
Disposal
The device, accessories and packaging should all be consigned for environment-friendly
recycling. Electrical tools which have come to the end of their service lives must be made
unusable by removing the mains power cable.
For EU countries only:
Do not dispose of electrical tools with household waste.
In accordance with EU Directive 2002/96/ EC concerned with used electrical and electronic
equipment and the incorporation of the requirements of the directive in national legislation,
unusable electrical equipment must be collected separately and consigned for environ-
ment-friendly recycling.
Warranty
The manufacturer provides a warranty within the framework of his terms and conditions of
delivery in accordance with the requirements of statutory/ country-specific provisions. Should
you need to make a claim under the warranty, please provide us with your invoice or delivery
note.
On no account will any warranty claims be accepted if any repairs are carried out by third
parties. In the event of any irregularities, please send the machine to us. Complaints can only
be accepted if the device is sent to the KEISERtools Service centre undismantled.
The warranty does not apply to damages caused by normal wear, overloading, improper
handling, unsuitable accessories or inadequate maintenance.
Any structural or functional modifications to the machine which are made without our agree-
ment shall render the warranty and the Declaration of Conformity null and void.
Subject to change.
Summary of Contents for KMS800
Page 1: ...Operating Manual GB ...
