SAFETY & ENVIRONMENT FIRST
Do
not
dispose
of
electrical
equipment
with
standard
domestic
waste.
Contact
your
local
authority
for
disposal
information
specific
to
your
area.
WARNING
I
This electrically heated garment must be used strictly in accordance with the
manufacturer’s instructions. Failure to observe this notice may lead to increased risk of
burns and fire resulting in injury or death.
I
Switch the garment off immediately and check the affected skin at any sign of irritation
or sensation of excessive heat.
I
Never leave the garment unattended when switched on.
I
This product is unsuitable for young children.
I
Do not use this product if you suffer from: heightened or impaired temperature
sensitivity; an inability to sense temperature extremes; circulatory problems resulting
from diabetes or other medical conditions.
I
Use
this
product
with
12V
systems
ONLY
, or Keis (optional) Battery Packs.
I
Always observe the correct fuse rating – see ‘Manage your Fuses’.
I
Do not modify or disassemble any part of the system in any way.
+
–
Fused Connection Lead
Glove
Supply
L
oom
OUTER
H
EA
T
ED
GLOVES
PREPARING A VEHICLE TO POWER YOUR KEIS HEATED GARMENT
Your Keis heated gloves are designed to be powered from a 12V source such as a vehicle battery
or Keis Battery Packs.
To power your Keis garment from a vehicle battery attach the Fused Connection Lead directly to the
battery or other live 12V source taking into account any safety notices issued by the vehicle
manufacturer and observing the polarity Red +ve and Black -ve.
Position the power socket so it is in a convenient position to power your garment and secure if necessary
using cable ties or tape ensuring that it cannot become trapped, damaged or interfere with the normal
operation of the vehicle.
WARNING
Always connect the Red +ve lead to the battery first.
POWERING
YOUR
KEIS
X900
HEATED
OUTER
GLOVES
USING
K
EIS
BATTERY
PACK
S
Your Keis X900 Heated Outer Gloves can be powered directly using the
optional
Keis Lithium Battery
Packs. Locate the zipped battery pocket inside the glove, install the battery and plug into the glove
socket.
NOTE:
DO NOT pull the plug out by the cable.
As
k
your
dealer
for
details
or
visit
www.keisapparel.co.uk.
POWERING YOUR KEIS HEATED OUTER GLOVES FROM OTHER KEIS
HEATED GARMENTS
Some models of Keis Heated Garments have dedicated power supply sockets for accessories so they
can share a single power source.
NOTE:
In some cases additional supply leads may be required. Ask your dealer for details or visit
www.keisapparel.co.uk.
I
Do
not
use
if
the
product
is
visibly
damaged.
MANAGE YOUR FUSES
WARNING
For your safety it is essential to manage
the fusing to your Keis Heated Apparel.
A selection of up to five fuses is supplied depending on
the current drain and potential combinations of the
garments.
On delivery the fuse holder in the supply loom may be
delivered without a fuse.
To
calculate the fuse value
required
s
imply add the current draws for each of the
garments
supp
li
ed by the 12V Supply Loom and use
the lowest rated fuse that exceeds the calculated
current.
NOTE:
A fuse value below the value required may fail
in use.
FOR
EXAMPLE:
Sleeved Jacket consumes 7A, Insoles
consume 1.3A. Therefore total is 8.3A. Next fuse value
above this is 10A so use a 10A fuse.
POWERING
YOUR
KEIS
GLOVES
FROM
A
VEHICLE
POWER
SOURCE
Your
Keis
heate
d gloves
must
be
powered
from
the
vehicle
battery
via
the
Fused
Connection
Lead
as
installed
above
or
the
optional
Cigarette
Lighter/Accessory
Plug.
Ask
your
dealer
for
details
or
visit
www.keisapparel.co.uk.
TO OPERATE: Loca
te
the
12v
Supply
Lead
and sim
ply
connect
or
disconnect
this
to
and
from
the
power
source
as
required.
An o
ptional on/off switch
is
available.
Garment
Current
Draw
Outer Gloves
(Pair)
1.0A
Under G
loves
(Pair)
1.0A
Lo Power
Bodywarmer
1.5A
Hi Power
Bodywarmer
3.3A
Sleeved
Jacket
7A
Trousers
3.3A
Insoles (Pair)
1.3A
Fuses
Colour
3A
Purple
5A
Tan
7.5A
Brown
10A
Red
15A
Blue
NOTE:
The potential
current drain when using
several garments can be
excessively high in some
situations. It is your
responsibility to ensure the
power source can provide
the current required in
such circumstances.
PREPARING THE GLOVES SUPPLY LOOM
Thread
the
Y-shaped
Glove
Supply
Loom
through
your
jacket
with
one
of
each
of
the
plugs
that
form
the
top
of
the
‘Y’
positioned
at
the
end
of
each
arm
an
d the r
emaining
one
protruding
from
the
waist
on
the
side
from
which
the
power
will
be
provided.
NOTE:
The
shorter
of
the
two
leads
on
the
Glove
Supply
Loom
should
be
positioned
on
the
side
to
which
you
will
connect
the
power.
If
you
use
the
gloves
on
a
regular
basis
consider
using
thread
to
tack
the
Glove
Supply
Loom
into
the
lining
of
the
jacket.
OPERATING
THE
INTEGRAL
TEMPERATURE
CONTROLLERS
When power is first supplied to the gloves the controller will flash red for 1 second.
TO OPERATE:
P
ress
and
hold
the
Power
Button
for
one
second.
The
Controller
will
initialise
on
Maximum
power
(
Red
).
Briefly
pressing
the
Power
Button
will
cycle
the
tempe
rature control thr
ough
‘Medium’
(
Amber
),
‘Low’
(
Green
)
and
back
to
Maximum.
T
O SWITCH OFF: Press and hold the Power Bu
tton
for
one
second.
I
Do
n
ot use if the gloves become wet inside.
X900
