KEHUA TECH BCS-B-H Series, User Manual

Page: 17 / 96

Power Conversion System BCS-B-H Series (1000K-1500K)
User Manual 2 Overview
All rights reserved © Kehua Data Co., Ltd.
9
Easy operation and close to user

Adopts 7 inch touch screen to make the daily management and maintenance easily. The touch
screen shows real-time operation parameter and status of the system.

The PCS provides various communication ways to satisfy the needs of high speed
communication. The scheduling communication adopts RS485 and Ethernet, BMS
communication adopts RS485and CAN.

The system supports the electric communication protocol of 104 and 61850 (optional) and is
suitable for various sites.
Precise operation and maintenance, reliable design

Single PCS can realize the switch between VF mode and PQ mode free. It makes the operation
and maintenance more conveniently.

Adopts DSP digitization technology, each energy storage container battery can balance the
capacity of themselves, which make the battery capacity of each container the same.

When the system part fault, it will exit to protect itself real time, which won’t affect the running
of micro-grid and guarantee the user benefit.

Provides multi protection function, such as islanding effect, low voltage ride through, etc., to
guarantee the device safety.

Can be used in highland. The used altitude can be 4000m at most. When the altitude exceeds
2000m, it needs to decrease rated power to use.
Green and high efficient, energy conservation

It can be scheduled by grid and the active power, reactive power can be adjusted independently,
the power factor can be adjusted at will.

It is suitable for multi-type battery and the battery charging & discharging rate can be adjusted
among several settings to achieve max. profit.
2.2 Appearance and Operation Panel
2.2.1 Appearance
The appearance of the PCS is as shown in Figure2-3.