Page
2
of
10
www.KegLand.com.au
Last Updated 1/30/2018 8:44 PM
Pump Servicing and Cleaning
The Robobrew units are a reliable and easy to maintain brewery. Under normal
circumstances it’s unlikely that you will be required to open, clean, or replace the pump.
With that said it is possible if something drops into the pump inlet causing a pump
blockage, or if mold starts to grow in the pump head (happens if the pump is not
sufficiently cleaned after use), or of the pump is just damaged for some reason then it
might be possible to remove the pump from the Robobrew.
NOTE:
Sometimes a blockage can be cleared simply be getting a garden hose and squirting
water back into the recirculation arm and filling up the boiler this way. This can
sometimes clear any blockages especially if they are caused by soft material such as
hop pellets or grain.
