RAPT Temperature Controller Instruction Manual
Page
8
of
17
Last Updated 24/05/2022 12:17 PM
Manual Operation
If you do not intend to connect your device to the RAPT Portal and hence do not want to utilise the
Wi-Fi functionality you can operate the controller completely manually via the buttons on the
display.
To remove the prompts requestion you to register your device to the RAPT Portal you will need to
disable the Wi-Fi in the settings. To do this press select (
⏎
) to enter the menu, then select
Settings
,
then navigate using the arrows to the
Disable Wi-Fi
setting. Press select (
⏎
)
to disable the Wi-Fi and
the controller will then restart automatically.
If you decide you don’t want to register your RAPT Temperatur
e Controller to the RAPT portal and
hence not use the Wi-Fi functionality of the controller you will in turn lose a lot of the functionality
of the controller which is offered through the RAPT Portal. This includes features such as setting up
complex temperature profiles which are run automatically and logging past temperature profiles.
Setting the Target Temperature
At the home screen press the up or down arrows to adjust the target temperature. The temperature
controller will then automatically send power to the heating or cooling terminals to power on your
heating or cooling device to maintain this target temperature.
Important: Make sure you have plugged your
heating device
such as a heat wrap into the
red
outlet
and your
cooling device
such as your fermentation chamber into the
blue outlet
.
Starting a Saved Temperature Profile
Temperature profiles which have been savedon the temperature controller can be manually started
without the need to log in to the RAPT portal. You will need to use the RAPT Portal to initially store
the temperature profile on the temperature controller. For instructions on how to store a
temperature profile on the device refer to
Storing a Temperature Profile on the RAPT Temperature
Once your Temperature profile is stored on the device simply press select (
⏎
) to enter the menu and
navigate to
Start profile
. Then select your desired profile which will display a graph of the steps in
the profile. Then press select again to start the profile. Your device will then automatically restart
and begin the temperature profile.
To stop running the temperature profile press select (
⏎
) to enter the menu and then select
Profile
control.
Then navigate using the arrows to the stop button and press select (
⏎
) to stop the
profile.
