RAPT Fermentation Chamber Instruction Manual
Page
5
of
13
www.KegLand.com.au
Last Updated 1/03/2022 4:36 PM
DEVICE REGISTRATION
Once you have made a RAPT account you will need to connect your RAPT Fermentation Chamber to
your Wi-Fi network.
Open your network and internet settings on your mobile device, tablet or computer and connect to
the KegLand RAPT wifi network using the password shown on the screen on your RAPT Fermentation
Chamber.
This will allow you to connect your RAPT Fermentation Chamber to your wifi network.
Once your RAPT Fermentation Chamber is connected to your wifi network you will then need to
register your device with your RAPT account.
When prompted on the screen, press the select (
⏎
)
button to enter the main menu then select
“Register Device”.
Select “Add new Device” then select “RAPT Fridge” within the RAPT portal and follow the prompts to
register your device.
Note: The MAC address and Validation code will be displayed on the screen of your RAPT
Fermentation Chamber during Device Registration.
Once you have registered your device with your RAPT account you will be able to change the target
temperature manually on the RAPT Fermentation Chamber using the “Up” or “Down” arrows or
change the target temperature through the RAPT portal.
For detailed instructions regarding use of the RAPT portal please refer to the following instructional
YouTube video:
https://www.youtube.com/watch?v=MzMYYmGM2ik
INSTALLING duotight BLOWTIE or INLINE REGULATOR (optional)
If you intend to pressure ferment in the RAPT Fermentation Chamber you may find it useful to install
a
KL15042 duotight BlowTie Spunding Valve
KL15035 duotight Inline Regulator
The duotight BlowTie Spunding Valve will allow excess pressure built up during fermentation to be
released from the fermenter allowing an optimal fermentation pressure to be set based on your
beer style and recipe.
Installation of a duotight inline regulator allows for easy pressurisation for closed transfers for
example.
There is a mounting point on either side of the RAPT temperature controller for mounting a duotight
BlowTie Spunding Valve or Inline Regulator.