MaltZilla Instruction Manual
Page
5
of
11
www.KegLand.com.au
Last Updated 28/05/2021 3:36 PM
TOP MOUNT
After mounting ensure the MaltZilla has not been installed upside down by investigating the
direction that the driven roller spins.
The driven roller should spin in the direction shown below. If your driven roller is spinning in the
reverse direction then the direction the MaltZilla is mounted needs to be reversed. (If you are using
an unwired power supply, the polarity of the DC Voltage should also be checked. The voltage should
have positive polarity).
BOTTOM MOUNT
