Splash Guard Semi-Automatic Cannular Assembly Manual
Page
3
of
7
www.KegLand.com.au
Last Updated 5/08/2020 3:12 PM
Identify and separate the two 3mm socket screws which have longer threads. These are required to
be used to attach the bump stops to the front face plate.
Step 1.
Attach the two corner brackets to the lower four holes on front face plate using the 3mm
socket screws and corresponding 7mm nuts. Tighten using a 7mm spanner and 3mm Allen key.
Step 2.
Place the black bump stops on the back of the face plate on the two upper most holes and
secure these using the two longer 3mm socket screws and 7mm nuts as shown below:
Step 1
Step 2