Fill-O-Meter Instruction Manual
Page
6
of
6
www.KegLand.com.au
Last Updated 5/10/2020 3:59 PM
The flow meter should not need to be calibrated, however, if you determine the flow rate or volume
delivered is inaccurate you can alter the k-factor to recalibrate the machine.
Changing the Calibration Password
Calibration requires a password to be input before the meter can be calibrated, this is to prevent any
unwanted calibration which would result in inaccurate volumes delivered.
To change the password used for calibration follow these steps:
1.
Press MENU until the flow rate quantitative statistic is displayed.
2.
Hold CLEAR for 3 seconds. The left most dash next to the PW symbol will be flashing.
3.
Use the up or down arrows to Input the default password of 1234 i.e. set the first digit to 1
using the up or down arrows and press set to confirm the value of the first digit and move to
adjustment of the second digit. Set the second digit to 2, the third digit to 3 and the fourth
digit to 4. (if the password is incorrect, a buzzer will alarm three times and the digits will be
reset requiring the password to be input again).
4.
Once the default password has been entered, 4 dashes will be on the instantaneous value
display.
5.
Set the new password in the instantaneous value display and then press SET
6.
Enter the digits of the new password again to set the new password.
Support
Please join the KegLand Home Brew Community Group for tips and tricks to operating your Fill-O-
Meter. If you need hardware support please contact the distributor you bought the Fill-O-Meter
from or if you bought it directly from KegLand then send an email to
Warranty (Australia)
The Fill-O-Meter comes with a 3 Year Warranty when sold in Australia. To lodge a warranty claim in
Australia please forward as many visual pieces of supporting information and a detailed description
of your issue to
If you purchased your unit from an international distributor, you will be required to go through their
warranty claims process.
For a full terms and conditions, please visit our website here ->
