Benchy
–
Carbon 12V/24V Instruction Manual
Page
3
of
13
www.KegLand.com.au
Last Updated 13/12/2021 4:54 PM
WARNING
NEVER USE A BATTERY CHARGER, TRANSFORMER/RECTIFIER, BATTERY
ELIMINATOR OR AC/DC CONVERTER TO POWER THE PRODUCT UNLESS
SUPPLIED BY KEGLAND
SETTING THE TEMPERATURE (ESC-961neo)
1.
Press and release the “set” to enter into the user menu.
2.
Press “set” will display the value of the target te
mperature setting.
3.
Press the up and down arror to adjust the value of the set temperature.
4.
Press
button or wait 30 seconds and the setting will be saved and return back to the
home screen
WARNING:
Do not set the temperature below 0°C or you risk freezing the beer or beverage that you
are dispensing. For a more detailed instruction manual for the controller download this from the
kegland website or go to the link below.
ESC-961neo temperature controller user manual
INSTALLATION REQUIREMENTS
ONLY USE ON FLAT SURFACE
The Benchy Carbon should only be used on a flat surface or at a maximum angle of 20 degrees off
level.
DO NOT
operate this unit on its side or at angles greater than 20 degrees or permanent
damage to the compressor will occur
PROVIDE ADEQUATE VENTILATION AND AVOID EXTERNAL HEAT SOURCES
In order to achieve the best possible performance from the Benchy Carbon we recommend 100mm
clearance around air vents. External heat sources such as direct sunlight, gas stoves or other heat
generating appliances should be avoided.
DO NOT USE BATTERY CHARGERS OR DC GENERATORS
Never use a battery charger, transformer/rectifier, battery eliminator or AC/DC converter to power
the product (unless supplied by KegLand). Such equipment can, under certain circumstances,
delivery current at a voltage which may damage the inverter. In order to use these devices always
ensure that a battery is connected in parallel between the charging equipment and the product
