Thermentor King User Manual
Page 15 of 16
Keg King is a registered business name of MCH Australia Pty Ltd
To set any of the above settings:
If the unit does not have power supplied, connect it to power via the 12V DC Power Supply
Pack.
1.
If the Temperature Control Panel is off, press and hold the power button until it turns
on. You should hear the pump start up.
2.
Press and
hold
the “S” Setting button for 3 seconds or more.
The setting mode is active when indicated by the SET LED on the display.
The display will show F1, which indicates the temperature setting mode.
To set the temperature, go to step 4.
3.
Use the up and down
arrow buttons to change the “F” setting that you need to
change.
(F1, F2, F3, F4 as detailed above)
4.
Press and
hold
the “S” button again to activate the
function setting mode
5.
While continuing to hold
the “S”
button, use the up and down arrow buttons to set the
desired value.
6.
Press the power button to save the set value.
