KegMaster
™
Solstice Installation Guide
Page 6 of 13
Keg King is a registered business name of MCH Australia Pty Ltd
KegMaster
™
Solstice Kegerator
Perfect for use within Australia because KegMaster
™
Solstice fridges have an ambient working
temperature up to 40°C.
Features
•
Powered by 12V DC
–
a world first (uses 2-5 amps, with a momentary inrush current below 20A)
•
Can be powered by solar power or car battery
•
Capacity: 6 x Cornelius (Corny) Kegs OR 4 x PET King Kegs and 1 x Corny Keg
•
Heats and Cools
–
use for fermentation or curing of small goods as well as a beverage fridge
•
304 Stainless steel exterior and interior
•
HJ-510 digital controller
•
Environmentally friendly R600a refrigerant
•
Cassette based - slide out compressor/heater assembly for easy maintenance or replacement
•
Optional Lockable Castors for easy moving
•
Reversible Door
•
Fits standard fonts (not included)
•
Cold air hose for font cooling
•
Internal 12V supply outlet for powering future internal accessories
•
Automatic defrost
•
Suitable for living off-grid
•
Suitable for humid environments
•
Suitable for under-bench installations
•
R600a Refrigerant
•
No coils in walls, so no issues drilling holes through walls, if needed
•
Sealed push-in gas line port for external CO2 cylinders
Installation Space Requirements
The Keg King KegMaster
™
Solstice fridges generate heat around the compressor (bottom back-right
corner) when cooling. This heat needs to be dissipated and if the heat is trapped it could potentially
overheat the unit and trigger compressor failure. Good ventilation is necessary for the longevity of
the unit. Please note that the following clearance requirements are a necessity and failure to meet
those requirements could void the warranty.
•
100mm clearance required for the back of the fridge.
•
100mm clearance required for the right-hand side of the fridge.
•
No clearance required for the top.
•
No clearance required for the left-hand side.
•
No clearance required for the bottom of the fridge however it is recommended for the fridge
to be elevated off the ground for moisture to dissipate.
•
If the unit is installed in an enclosed space behind doors, the doors must have vents and
clearances must be respected. In this case, a minimum front clearance of 50mm is required.
