KEF V Series, Quick Start Manual, Page: 4 / 76

4
English
Please take heed of the following before using the KEF V500. Note also that the word “appliance” shall
refer to the KEF V500, or any part of it.
1. Read Instructions – All the Safety and Operating Instructions should be read before operating the
appliance.
2. Retain Instructions – The Safety and Operating Instructions should be retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the Operating Instructions should be adhered to.
4. Follow Instructions – All Operating and Use Instructions should be followed. Only use attachments/
accessories specified by the manufacturer.
5. Important – Do not defeat the safety purpose of the polarized or grounding type plug. The third prong
is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet. Refer all servicing to a qualified service personnel. Servicing is required
for any damaged parts such as power supply cord or plug.
6. Water and Moisture – The appliance should not be used in or near water, for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, and the like. The
appliance shall not be exposed to dripping or splashing. Care should be taken so that objects containing
liquids are not placed upon or spilled into the enclosure through openings and that no objects filled with
liquids, such as a vase, shall be placed on the appliance.
7. Ventilation – The appliance should be situated so that its location or position does not interfere with its
proper ventilation. For example, the appliance should not be situated on a bed, sofa, or similar surface
that may block any ventilation openings.
8. Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves
or other appliances (including amplifiers) that produce heat.
9. Power Sources – The appliance should be connected to a power supply only of the type described in the
Operating Instructions or as marked on the appliance and it shall remain readily operable. The mains plug
is used as the disconnect device. To be completely disconnected from the power input, the mains plug of
the appliance must be disconnected from the mains completely. The building installation shall be regarded
as providing protection in accordance with the rating of wall socket outlet.
10. Power Cord Protection – Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs,
convenience receptacles and the point where they exit from the appliance. The mains plug should not be
obstructed or should be easily accessed during intended use.
11. Attachments and Accessories – Use only attachments/accessories specified by the manufacturer.
12. Handling – The appliance should be transported with the cart, stand, tripod, bracket, or table specified
by manufacturer, or sold with the apparatus. When a cart is used, pay caution when moving the cart/
appliance combination to avoid injury from tip-over.
13. Non-use Periods – Unplug the appliance during lightning storms or when unused for long periods of
time.
14. Damage Requiring Service – The appliance should be serviced by qualified service personnel when:
a) The power supply cord or the plug has been damaged; or
b) Objects have fallen or liquid has been spilled into the appliance; or
c) The appliance has been exposed to rain; or
d) The appliance does not appear to operate normally or exhibits a marked change in performance; or
e) The appliance has been dropped or the enclosure is damaged.
15. Servicing – The user shall not attempt to service the appliance beyond that described in the Operating
Instructions. All other servicing should be referred to qualified service personnel.