6
2.0 Directions
2.1 Operation
After adjustment and connection, the belt grinding machine is ready for use. The
grinding can take place by the contact wheel (E) or on the surface grinding table by
opening the cover (H). The lifetime of a new belt is prolonged if the grinding starts
with a light pressure.
Please note these safety rules
: the machine is designated for use only with non-
spark materials, such as Aluminium-bronze- yellow metal.
Never
use steel or any type of metal that when grinded will dispose sparks.
2.2 Security
The existing safety rules must be kept in order to avoid personal or material injury
when working with the belt grinder.
A. User
Do not wear loose clothing, gloves, rings, bracelets, or other jewellery to get caught
in moving parts. Nonslip footwear is recommended. Wear protective hair covering to
contain long hair.
Always wear eye protection and face or dust mask if the operation is dusty. Ordinary
glasses cannot replace eye protection.
Don´t overreach. Keep proper footing and balance at all times.
Never leave tool running unattended. Turn power off. Don´t leave tool until it comes
to a complete stop.
Don´t operate tool while under influence of drugs, alcohol, or any medication.
B. Use of Machine
Use right tool. Don´t force tool or attachment to do a job for which it was not
designed.
Use recommended accessories. Consult the owner´s manual for recommended
accessories. The use of improper accessories may cause hazards.
C. Adjustment
Make all adjustments with the power off. In order to obtain the machine precision and
correct ways of adjustment while assembling, the user should read the detailed
instruction in this manual.
D. Working Environment
Keep work area clean. Cluttered areas and benches invite accidents.
Don´t use in dangerous environment. Don´t use power tools in damp or wet locations
or expose them to rain. Keep work area well-lighted.