8
3
–
Controls & Connections
•
BT
PAIRING
Press when pairing LSX to a Bluetooth device.
•
M/S
PAIRING
Use in conjunction with the corresponding button on a slave speaker to
facilitate master/slave pairing. Can be used in the event pairing fails, or if the user decides
to use a different LSX slave speaker.
•
RESET
Performs LSX system factory reset, including clearing of network information.
The reset button is below the arrow, the reset indicator above it. Press and hold
RESET
button until
RESET INDICATOR
flashes. Reset is complete when indicator stops flashing.
•
OPTICAL
TOSLINK optical audio cable input for connection to television optical
output. May also be used for audio devices with optical outputs such as CD players.
•
AUX
Analog audio input. Connect to audio devices such as turntables, tape decks or CD
players.
Analog signals will be converted to a digital stream by the LSX on-board
Analog-to-Digital convertor allowing
KEF’s
DSP to maintain the highest possible
audio quality from all connected devices.
•
SUB
Standard RCA-type connector for external subwoofer connection.
•
NETWORK
Standard Ethernet connection (Cat6 or greater) for direct connection to
local network router.
•
SV = 2A OUT
USB-A type connector for device charging.
•
TO SLAVE
Interspeaker connection output to Slave speaker for
C
ABLE
M
ODE
.
•
AC
Connect to AC power
