DESIGN
Attention to every detail
The LS50 Meta has inherited its distinctive good looks from the original LS50, with its low-diffraction,
curved baffle precision modelled around the Uni-Q driver array. The curved front is subtly mirrored
by the gently radiused rear panel, while both the port exit and speaker terminals have been elegantly
recessed and softened visually.
On the LS50 Meta’s underside, each corner has a threaded inset allowing the speaker to lock onto the top
of the new KEF S2 Floor Stand, which also boasts integrated cable management and a mass-loadable
column. LS50 Meta is available at launch in four colours, all of which benefit from a modern silky matte
finish, while the S2 Floor Stands are colour matched to the models.
The LS50 Meta Standmount Loudspeakers deliver on every aspect of the KEF promise. A genuine industry
first, LS50 Meta utilises innovative, ground-breaking technology to provide you with an immersive,
completely believable sound from a compact, stylish loudspeaker that is destined to open up whole new
vistas of enjoyment in your life.
Carbon Black
Titanium Grey
Mineral White
Royal Blue
Special Edition
Specifications
Model
LS50 Meta
Design
Two-way bass reflex
Drive units
Uni-Q Driver Array:
HF: 25 mm (1 in.) vented aluminium dome with Metamaterial Absorption Technology
MF/LF: 130 mm (5.25 in.) aluminium cone
Crossover frequency
2.1 kHz
Frequency range (-6dB)
47 Hz - 45 kHz
Typical in-room bass response (-6dB)
26 Hz
Frequency response (±3dB)
79 Hz - 28 kHz
Harmonic distortion (90dB, 1m)
<0.4% 175 Hz - 20 kHz
<0.1% 300 Hz - 10 kHz
Maximum output
106 dB
Amplifier power (recommended)
40-100 W
Nominal impedance
8 Ω (min. 3.5 Ω)
Sensitivity (2.83V/1m)
85 dB
Weight*
7.8 kg (17.2 lbs.)
Dimension (H x W x D) with terminal*
302 x 200 x 280.5 mm (11.9 x 7.9 x 11.0 in.)
* Measurement per unit
Visit: KEF.com for more about KEF and its products.
KEF reserves the right, in line with continuing research and development, to amend or change specifications. E&OE.
08.2020 | LS50 Meta
