Version1.2 TS MOTO
5
When LED blinks the fourth digit of PIN NUMBER, turn ignition ON, 4th
PIN NUMBER will be input, and turn ignition OFF.
5 sec. After 4 New PIN NUMBER has been input, LED will automatically
show the new PIN NUMBER to confirm: Blink 1st digit –pause 2 second-blink
2nd digit - pause 2 second…
Turn ignition ON, or 10 sec after new PIN NUMBER confirm, system will exit PIN
NUMBER setting mode.
Attention: when the inputed code is super code(8555),the old key will be
reset automatically.
V
ALET MODE
You can prevent your security system from automatically arming by using valet mode, this
is very useful when washing the motorcycle for example, in valet mode, the security
system will not arm, even with the transmitter, but any accessory functions will continue
to work normally.
E
NTER VALET MODE
:
Ignition ON, press and hold button 2+3 within 5 seconds, (the siren will chirp once even
the button was pressed once)
，
t
h
en unit will enter valet mode. In valet mode, press button
1, siren will chirp 3 times
.
LED quickly flashes 3 times and then cycle.
The same way to exit valet mode.
M
EMORY FUNCTION
This security system will store its current state to non-volatile memory. If power is lost
and then reconnected the system will recall the stored state from memory. This means if
the unit is in valet mode and the battery is disconnected for any reason, such as servicing
the motorcycle, when the battery is reconnected the unit will still be in valet mode. This
applies to all states of the system including arm, disarm, and valet mode.
H
IGH FREQUENCY
Your system transmits and receives at 433 MHz; this provides a cleaner spectrum with less
interference and a more stable signal.
