Settings
Work Period Set
12
KEEP
TIME
Work Period Set
ON
OFF
OK Set MENU Exit
Time Scan
Time Scan
Press OK and use UP/DOWN keys ( to change the setting ) and
LEFT/RIGHT keys ( to move to the next field ) to set time. Once
all settings are made, press OK to save. Only during the set work
period camera will be triggered to take images/videos.
Time Scan (Time Lapse) recording mode on/off. When activated,
Time Scan forces the camera to take photos or videos even
when it is not triggered by an nearby live animal,useful for
constant monitoring of an area that might be far away from the
camera. The user can set start and stop times for up to two in
dependent “blocks”of Time Scan recording,as well as the
interval time between each photo/video.
Interval: 1m~59m or 1h~6h
Sensor Level
Auto
Sensor Level
OK Set MENU Exit
ON
OFF
OK Set MENU Exit
Four kinds of choice:Auto, Low, Normal, High.
The default “Auto” setting will allow the camera to determine
the best setting based on its current operating temperature.
This is an ideal setting if the weather is expected to change
significantly during the period the camera will be used.
The Low setting is recommended in cold weather; the High
setting is recommended in hot weather.
